An eye bolt, often called a lifting eye bolt or eyelet, has a loop at one end. They can use either pivot or swivel and are utilized for a wide range of material lifting tasks. The anchor eye bolt must be securely secured to the building to safely anchor lifting ropes or cables.There may be a predrilled hole for the eye bolt in some designs. The load may need to be connected to a stud, a hole intended for a different purpose.
Do you hope to get knowledge concerning the practical uses of eye bolts? You’ve found the correct page! This article will outline the many eye bolts available, along with their sizes and services.
Types of Anchor Eye Bolts:
Different sizes and coatings are available for each of the four primary types of eye bolts. Eye bolts often include a drop-forged eye as part of their standard kit. Eye bolts are available in various materials and finishes, including hot-dip galvanized and stainless steel.
Long Eye Bolts
An extended shank makes these eye bolts stand out. You can use these for various purposes, such as securing support wires to wooden fence posts for training soft fruit and grapevines.
Long Shank Eye Bolts
Eye bolts with long shanks come in various diameters and usually have an anti-corrosion coating. Several functional purposes can benefit from them.
Large Screw Eye Bolts
It’s possible to find these eye bolts in materials like stainless steel and zinc-plated steel, both of which are strong and long-lasting. They can be fastened to wood and brick andare available in various lengths.
Marine Eye Bolts
Machine-threaded eye bolts and ring bolts made of stainless steel are widely available in industrial and maritime settings.
Lag Eye Bolt
You can use these heavy-duty materials like zinc-plated steel to create a wide selection of lag eye bolts. Use wall plugs to fasten these eye bolts to wood or brick safely.
Collar Eye Bolts
There is a substantial collar between the eye and the screw thread of these eye bolts. They work well for situations requiring two or more lifting points and axial loading.
Anchor Eye Bolt Size Guide
The most accurate place to measure an eye bolt is right under the eye. Eye bolts, such as dynamo and long shank, come in wide lengths. The terminology used to describe the size of eye bolts is standard. These are 1/2-inch by 6-inch stainless steel lag eye bolts and 1/2-inch by 6-inch shoulder eye bolts. The 12″ unit refers to the shank’s diameter. The shank length is what’s meant by the “6” measurement.
Uses of Anchor Eye Bolts
Anchor eye bolts are made of heavy forging and are commonly used to secure components to a shoulder that is also part of the bolt. They are helpful for the off-axis lifting of heavy loads. However, eye bolts without a shoulder are ineffective when lifting heavy off-axis loads. Smaller eye bolts often comes in handy for non-load-bearing applications such as wire tensioning and load securing.
Final Verdict
Eye bolts with a specified load capacity are designed for vertical lifting. On the other hand, you shouldn’t try to use them for angular lifting. Tie-down and guided wire applications are suitable for use with non-load-rated bolts. It would be best if you didn’t use them for heavy lifting.
